Jasco Wireless Color Camera with Receiver 45234 Manual do Utilizador

www.jascoproducts.com1-800-654-848345234Home MonitoringWireless Color Camera with ReceiverUser Manual

10Desktop Mount: 1. Place camera in desired location on a fl at surface. 2. Set Channel switch on camera to 1 or 2.3. Power ON the TV/monitor; reconnec

11plate to the wall. Do not run the adapter cable in walls; when securing the cable, do not cut or puncture.3. Set Channel switch on camera to 1 or 2.

12OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY)Rechargeable NiMH Battery is available for use with the 45233 Wireless Color Camera. This

13TROUBLE SHOOTINGIf you are having trouble operating this product, please consult the guide below. If you have anyquestions or feel the camera system

14range, and that no large obstructions are blocking the signal.2. Try repositioning the camera, receiver or both to improve the reception quality.3.

15Min. Illumination ... 0 lux up to 3 feet, 0.5lux up to 10 ft Voltage ...

16FCC STATEMENTNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC R

2Thank you for purchasing the GE 45234 Wireless Color Camera System with Receiver. Please review these instructions carefully before attempting to ope

31. 45233 Wireless Color Camera2. 45234 Wireless Receiver3. Wall plate and mounting hardware for camera4. 2 AC adapters5. AV cableBEFORE YOU INSTALLWh

4indoor or outdoor use. When choosing a mounting location, please be advised:Do not use in wet locations. If using outside, position camera in a shelt

5reduced due to interior walls, wiring, household fi xtures and metal plumbing. CONNECTING TO A TV OR MONITORTo prepare for installation of the system,

6plug to the yellow VIDEO IN jack and the white plug to the white AUDIO IN jack. 2. Plug the AC adapter into the power jack (marked on the back of the

7cannot be on the same channel or the signals will cancel out.Multi-Camera OperationThis wireless surveillance system is designed to work with up to 2

8Auto Mode (2 Camera Operation)To have the receiver automatically switch between two active channels, fi rst check the receiver is set to 1/2 position.

9SensorInfra-Red (IR) LEDs‘see’ in the dark. Night Vision willappear as a Black andWhite image. When the image sensor detects enough light, color will