Jasco 45146 Manual de Instruções

Choice ALERTChoice ALERT™Control all sensors, accessories and remote transmitters from one location™Wireless Alarm SystemWireless KeypadUser’s Manual1

1011Mounting the Wireless Keypad onto a Wall (using double sided tape strips)Select a suitable location that provides protected, easy access. Be sure

1011Step 3. (a) If mounting into drywall, use the plastic anchors. Using a 3/16” drill bit, drill holes and insert anchors for a snug fit. Align mounti

1213button. If the Control Center is in range, the Armed light will begin flashing on the Control Center and the Control Center will begin beeping for

1213Replacing a Wireless KeypadIf a Wireless Keypad is lost or broken, you can replace it (with another Wireless Keypad or any remote access device).

1415Control Center may seem to have batteries that last longer than a Wireless Keypad located farther away. As battery power reduces, the transmission

1415Step 1. Remove battery. Step 2. Press and hold both the panic (RED) button and the Disarm (GREEN) button at the same time.Step 3. While pressing b

1617Wireless Keypad Remote F.A.Q.’SQ. I bought a Wireless Keypad and the Control Center will not recognize it. Why?A. First, make sure that the batt

1617FCC WarningAny unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal la

18WARNINGLimitations of Alarm ProductsThis product should be tested periodically to make sure it is working properly. The product, if used properly, m

18 is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City,

23Important Safeguards 4Introduction 5Assigning a Wireless Keypad to a Device Location 6Programming Security Codes into 7the Wireless Keypad

23Before connecting or operating the Wireless Keypad, please read these instructions carefully and save this manual for future reference.Congratulatio

45Important safeguardsPreCautions1. Do not attempt to disassemble the Wireless Keypad, unless described in the user’s manual. There are no user servic

45IntroductionThe Wireless Keypad allows you to wirelessly control your Choice Alert System. With this keypad, you will be able to arm, disarm and imm

671 2 3 4ArmZoneArmed Power1 2 3 4AlertChimeOffMuteLearnInputDC12V-+Step 1Press and hold the Learn buttonfor three secondsStep 3To activate the keyp

67Step 3. Press the red Panic button on the wireless keypad. The Control Center will sound a long beep and the LED will stop flashing. This confirms the

89Step 2. Enter a number (1, 2, or 3) for the User code you would like to change (1=Master code, 2= User 2 code, 3 = User 3 code). Step 3. Press a

89Step 1. Press and release Green button. Enter Current Master code. Press and release the Green button. The LED will light.Note: You have approx 30