Jasco 45146 Manual de Instruções descarregar pdf (Página 10)

Mounting the Wireless Keypad onto a Wall (using

double sided tape strips)

Select a suitable location that provides protected, easy

access. Be sure to test the device before mounting.

Clean both surfaces with 50/50 mix of isopropyl

alcohol and water. Using the provided double sided

tape strips, peel one side and ﬁrmly apply to the

indented areas on the back of the mounting plate.

Peel the remaining side of the double sided tape and

lightly mount to the wall. Once you are conﬁdent with

the placement, press ﬁrmly to secure to the wall.

Mounting the Wireless Keypad onto a Wall (using

screws/wall anchors) – you will need a drill, 3/16” or

1/8” drill bit and screwdriver.

Step 1. Remove the top cover from the mounting

plate. (See Removing the Top Cover from the

Mounting Plate.) Set the top cover aside.

Step 2. Select a suitable location that provides

protected, easy access. Be sure to test the device

before mounting. Use the mounting plate as a

template. Be sure to position the mounting plate with

the arrow pointing up. Mark the two holes on the wall

for the anchors and/or screws as shown. Please be

sure to mark the center of the holes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sem comentários

Jasco 45146 Manual de Instruções Página 10